Error when trying to make tests for target AVR

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Error when trying to make tests for target AVR

Christo Crause
I'm trying to run the test suite for AVR by executing the following make statement:

make FPC=~/fpc/3.1.1/compiler/ppcx64 TEST_FPC=~/fpc/3.1.1/compiler/ppcrossavr
TEST_CPU_TARGET=avr TEST_OS_TARGET=embedded TEST_SUBARCH=avr5 TEST_OPT="-XPavr-"

from the /tests folder. Make terminates with the error, see below for the last couple of lines of output:
make -C tstunits FPC_VERSION= FPC=/home/christo/fpc/3.1.1/compiler/ppcrossavr CPU_TARGET=avr OS_TARGET=embedded SUBARCH=avr5 'OPT=-XPavr- -Fd' CCOMPILER= BINUTILSPREFIX=
make[2]: Entering directory '/home/christo/fpc/3.1.1/tests/tstunits'
make -C ../../rtl all 'OPT= -n' 'CROSSOPT=-XPavr- -Fd'
make[3]: Entering directory '/home/christo/fpc/3.1.1/rtl'
make -C embedded all
make[4]: Entering directory '/home/christo/fpc/3.1.1/rtl/embedded'
make[4]: Leaving directory '/home/christo/fpc/3.1.1/rtl/embedded'
make[3]: Leaving directory '/home/christo/fpc/3.1.1/rtl'
make -C ../../rtl install INSTALL_PREFIX=/home/christo/fpc/3.1.1/tests/tstunits/tmp INSTALL_UNITDIR=/home/christo/fpc/3.1.1/tests/tstunits/avr-embedded OPT= CROSSOPT=
make[3]: Entering directory '/home/christo/fpc/3.1.1/rtl'
make -C embedded all
make[4]: Entering directory '/home/christo/fpc/3.1.1/rtl/embedded'
make[4]: Leaving directory '/home/christo/fpc/3.1.1/rtl/embedded'

__missing_command_FPCMAKE -p -Tavr-embedded Makefile.fpc

make[3]: __missing_command_FPCMAKE: Command not found
Makefile:1450: recipe for target 'fpc_install' failed
make[3]: *** [fpc_install] Error 127

I've tried 3.0.4 as starting compiler but got the same error.  I can generate a cross compiler for AVR normally.  Any idea what is missing/wrong here?
_______________________________________________
fpc-pascal maillist  -  [hidden email]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Reply | Threaded
Open this post in threaded view
|

Re: Error when trying to make tests for target AVR

Christo Crause
On Sun, 2018-01-07 at 05:59 +0200, Christo wrote:
> __missing_command_FPCMAKE -p -Tavr-embedded Makefile.fpc

Adding fpc_baseinfo to the make command revealed that FPCMAKE was not defined (I guess it should
have been obvious from the error message in the first place). I added the path to fpcmake
(FPCMAKE=path_to_fpcmake) to the make command line and the tests are now running.
_______________________________________________
fpc-pascal maillist  -  [hidden email]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Reply | Threaded
Open this post in threaded view
|

Re: Error when trying to make tests for target AVR

Florian Klämpfl
Am 07.01.2018 um 06:12 schrieb Christo:
> On Sun, 2018-01-07 at 05:59 +0200, Christo wrote:
>> __missing_command_FPCMAKE -p -Tavr-embedded Makefile.fpc
>
> Adding fpc_baseinfo to the make command revealed that FPCMAKE was not defined (I guess it should
> have been obvious from the error message in the first place). I added the path to fpcmake
> (FPCMAKE=path_to_fpcmake) to the make command line and the tests are now running.

Do you have an fpcmake somewhere in your path?

_______________________________________________
fpc-pascal maillist  -  [hidden email]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
Reply | Threaded
Open this post in threaded view
|

Re: Error when trying to make tests for target AVR

Christo Crause
On Sun, 2018-01-07 at 11:30 +0100, Florian Klaempfl wrote:

> Am 07.01.2018 um 06:12 schrieb Christo:
> >
> > On Sun, 2018-01-07 at 05:59 +0200, Christo wrote:
> > >
> > > __missing_command_FPCMAKE -p -Tavr-embedded Makefile.fpc
> > Adding fpc_baseinfo to the make command revealed that FPCMAKE was not defined (I guess it
> > should
> > have been obvious from the error message in the first place). I added the path to fpcmake
> > (FPCMAKE=path_to_fpcmake) to the make command line and the tests are now running.
> Do you have an fpcmake somewhere in your path?

No, I uninstalled fpc and run from compiled source. At some point I had version conflicts when
building trunk and now I run everything from the fpc source folder.  The downside is that
sometimes utilities aren't where they are expected, like in this case. 
_______________________________________________
fpc-pascal maillist  -  [hidden email]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal